求改写公式　[金字塔]

下面是飞狐的公式，如果可以的话把那个柱子改成图2样子，谢谢

Var1:=(HIGH+LOW)/2;
AO:=MA(Var1,5)-MA(Var1,34);
AOGreen:IF(AO>REF(AO,1),AO,0),COLORRED,LINETHICK0;
STICKLINE(AO>=REF(AO,1),0,AO,6,1),COLORRED;
AORed:IF(AO<REF( AO,1),AO,0),COLORGREEN,LINETHICK0;
STICKLINE(AO<REF(AO,1),0,AO,6,1),COLORGREEN;
SignalLine:MA(AO,5),COLORBLUE;

b1:=CROSS(AO,0);
DRAWICON(b1,AO,4),ALIGN0;
DRAWTEXT(b1,AO,'B'),ALIGN4,COLORWHITE;
{//----------------------------以上是上穿0信号;}
b2:=ao>0 and REF(ao,1)<REF(ao,2) and ao>REF(ao,1) ;
{DRAWNUMBER(1>0,ao,lu2,0);}
DRAWICON(b2,AO,4),ALIGN0;
DRAWTEXT(b2,AO,'B'),ALIGN4,COLORWHITE;
{//-----------------------------以上碟型买入信号;}
bcount:=BARSLAST(ao>0);{//上一次ao>0后到现在的周期数;}
{//DRAWNUMBER(1>0,ao-0.1,bcount,0);}
bd:=LLV(ao,bcount);{//求上面周期的最小ao;}
bcountd:=LLVBARS(ao,bcount);{//求最小值到现在的周期数;}
{//DRAWNUMBER(1>0,ao-0.3,bcountd,0);}
b3:=ao<0 and REF(ao,1)<REF(ao,2) and ao>REF(ao,1);{//满足峰的条件;}
b31:=COUNT(b3,bcountd);{//满足上面条件的次数;}
{//DRAWNUMBER(1>0,ao-0.5,lu31,0);}
DRAWICON(b31>=2 and b3,AO,4),ALIGN0;
DRAWTEXT(b31>=2 and b3,AO,'B'),ALIGN4,COLORWHITE;
{//----------------------------以上是双峰买进信号;}

s1:=CROSS(0,AO);
DRAWICON(s1,AO,5),ALIGN0;
DRAWTEXT(s1,AO,'S'),ALIGN5,COLORWHITE;
{//----------------------------以上是下穿0信号;}
s2:=ao<0 and REF(ao,1)>REF(ao,2) and ao<REF(ao,1);
{DRAWNUMBER(1>0,ao,lu2,0);}
DRAWICON(s2,AO,5),ALIGN0;
DRAWTEXT(s2,AO,'S'),ALIGN5,COLORWHITE;
{//-----------------------------以上碟型卖出信号;}

scount:=BARSLAST(ao<0);{//上一次ao>0后到现在的周期数;}
{//DRAWNUMBER(1>0,ao-0.1,scount,0);}
sd:=HHV(ao,scount);{//求上面周期的最大ao;}
scountd:=HHVBARS(ao,scount);{//求最大值到现在的周期数;}
{//DRAWNUMBER(1>0,ao-0.3,scountd,0);}
s3:=ao>0 and REF(ao,1)>REF(ao,2) and ao<REF(ao,1);{//满足峰的条件;}
s31:=COUNT(s3,scountd);{//满足上面条件的次数;}
{//DRAWNUMBER(1>0,ao-0.5,s31,0);}
DRAWICON(s31>=2 and s3,AO,5),ALIGN0;
DRAWTEXT(s31>=2 and s3,AO,'S'),ALIGN5,COLORWHITE;

{//----------------------------以上是双峰卖出信号;}